256 * 128mm LED Indoor General Screen p2
Lebone Bead Information
Sephutheloana sa RGB, li-chips li hlophisitsoe ka tsela e otlolohileng;
Sebelisa substrate e ntšo ea sephutheloana ho ntlafatsa phapang ea mebala;
Sehlahisoa se bobebe ka boima ba 'mele,' me boima ba LED e le 'ngoe bo nyenyane joaloka 1.0mg;
Liphutheloana tsohle tsa RGB tse ntšo li ka phethahala;
Bokaholimo ba sehlahisoa bo tšoaroa ka bokaholimo ba matte, 'me khanya ea skrine e bonolo.
| Tekanyetso ea tekheniki(T=25℃) | ||
| Ntho | ||
| Motheo Paramethara | ||
| Pixel Pitch | 2mm | 4mm |
| Sebopeho sa Pixel | 1R1G1B | 1R1G1B |
| Pixel Density | 250000/㎡ | 62500/㎡ |
| Qeto ea Mojule | 128 (W) * 64 (H) | 64 (W) * 32 (H) |
| Boholo ba Mojule (WXH) | 256mm * 128mm | 256mm * 128mm |
| Optical Paramethara | ||
| Khanya ea Ntlha e le 'Ngoe, Khalemelo ea Chroma | tshehetso | tshehetso |
| White Balance Khanya | ≥600cd/㎡ | ≥600cd/㎡ |
| Mocheso oa Mobala | 2000K—12500K e ka Fetohang | 2000K—12500K e ka Fetohang |
| Angle ea ho Shebella e Tletseng | 140 Deg. | 140 Deg. |
| Thepa ea ho Shebella Angle | 120 Deg. | 120 Deg. |
| Bohole bo bonahalang | 9+ m | 9+ m |
| Khanya Uniformity | ≥97% | ≥97% |
| Phapang karo-karolelano | ≥5000:1 | ≥5000:1 |
| Ts'ebetso ea Ts'ebetso | ||
| Likotoana tsa ts'ebetso ea mats'oao | 16 likotoana * 3 | 16 likotoana * 3 |
| Sekala se boputsoa | 12-14Bit | 12-14Bit |
| Bohole ba ho Laola | Cable: 100 m, Optical Fiber: 10km | Cable: 100 m, Optical Fiber: 10km |
| Drive Mode | mokhanni oa mohloli oa kamehla | mokhanni oa mohloli oa kamehla |
| Sekhahla sa Frame | ≥60HZ | ≥60HZ |
| Refresh Rate | 1920-3840HZ | 1920-3840HZ |
| Mokhoa oa ho Laola | Amahanya | Amahanya |
| Khanya Adjustment Range | 0-100Bafetoheli ba se nang Mehato | 0-100Bafetoheli ba se nang Mehato |
| Tšebeliso ea parameter | ||
| Nako ea Ts'ebetso e Tsoelang Pele | ≥72 lihora | ≥72 lihora |
| Ho lebeletsoe Bophelo bohle ba LED(Boholo) | > lihora tse 100,000 | > lihora tse 100,000 |
| Boemo ba IP | IP20 | IP20 |
| Mocheso oa ho sebetsa | -20 ℃ ho 50 ℃ | -20 ℃ ho 50 ℃ |
| Mongobo o sebetsang | 10 % - 80% RH Ha ho Condensation | 10 % - 80% RH Ha ho Condensation |
| Mocheso oa polokelo | -20 ℃ ho 60 ℃ | -20 ℃ ho 60 ℃ |
| Parameter ea Motlakase | ||
| Voltage e sebetsang | DC 4.2- 5V | DC 4.2- 5V |
| Litlhoko tsa Matla | AC: 220× (1±10%) V, 50× (1±5%)Hz | AC: 220× (1±10%) V, 50× (1±5%)Hz |
| Boholo ba tšebeliso ea matla | 680W/㎡ | 680W/㎡ |
| Karolelano ea tšebeliso ea matla | 270W/㎡ | 270W/㎡ |
Ngola molaetsa wa hao mona mme o re romele wona
